This model operates at a pressure of 25 MPa (approximately 250 kg), classifying it as high-pressure equipment. Before operation, it is essential to check that safety valves, pressure gauges, and other protective devices are functioning correctly. The air-cooled system relies on ambient ventilation; therefore, installation in enclosed spaces should be avoided to prevent poor heat dissipation and potential shutdowns.
Routine maintenance includes periodically cleaning the intake filter, checking piston ring wear and lubricating oil condition, and recommending changing the dedicated lubricating oil every 500 hours. Customization is available; flow rate or compression stages can be adjusted to meet actual air consumption, but this must be done after a safety assessment by a qualified professional.