To ensure the long-term stable operation of natural gas compressors, routine maintenance is crucial. This includes not only regular lubrication and oil changes, but also the implementation of anti-corrosion measures and the calibration of equipment precision. These measures effectively reduce component wear and failure rates, keeping the equipment in optimal working condition.
Specifically, routine maintenance covers several aspects. Quarterly, the system needs thorough cleaning to check the sensitivity of the solenoid valves, and the copper-based sintered filter before the solenoid valves should be cleaned to ensure it is free of contaminants. In addition, filter elements should be replaced as needed, and all levels of valves should be thoroughly cleaned to remove carbon deposits. The compressor exterior also requires regular cleaning and compressor oil changes. After cleaning, the compressor's moving parts should be thoroughly inspected and calibrated to ensure flexibility and stability during operation. Finally, don't forget to thoroughly drain the separator, vent pipe, filter, and recovery tank.